View HSD101PFW2-B00_7307413.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 1/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. hannstar product specification (formal) model: hsd101pfw2 -b note: (1) please contact hannstar display corp. b efore designing your product based on this module specification. (2) the information contained herein is presented m erely to indicate the characteristics and performance of our products. no responsibility is a ssumed by hannstar for any intellectual property claims or other problems that may result from application based on the module described herein. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 2/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. record of revisions rev. date sub-model description of change 1.0 b** formal product specification was first released. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 3/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. contents 1.0 general description p.4 2.0 absolute maximum ratings . p.5 3.0 optical characteristics. . p.6 4.0 block diagram p.10 5.0 interface pin connection p.12 6.0 electrical characteristics p.13 7.0 reliability test items p.20 8.0 outline dimension p.21 9.0 lot mark ... p.23 10.0 package specification p.24 11.0 general precaution p.25 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 4/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 1.0 general description 1.1 introduction hannstar display model hsd101pfw2-b is a color acti ve matrix thin film transistor (tft) liquid crystal display (lcd) that uses amorphous silicon tft as a switching device. this model is composed of a tft l cd panel, a driving circuit and a back light system. this tft lcd has a 10.1 (1 6:9) inch diagonally measured active display area with wsvga (1024 horiz ontal by 600 vertical pixel) resolution. 1.2 features 10.1 (16:9 diagonal) inch configuration one channel lvds interface 262k color by 6 bit r.g.b signal input rohs compliance halogen free 1.3 applications mobile nb digital photo frame display terminal for av application 1.4 general information item specification unit outline dimension 235 x 143 x 4.9 (typ.) mm display area 222.72(h) x 125.28(v) mm number of pixel 1024 rgb (h) x 600(v) pixels pixel pitch 0.2175(h) x 0.2088(v) mm pixel arrangement rgb vertical stripe display mode normally white ntsc 50 % surface treatment anti-glare, hard-coating (3h) weight 175 (typ.) g back-light white led power consumption 0.65w (max.)/logic w www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 5/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 1.5 mechanical information 2.0 absolute maximum ratings 2.1 electrical absolute rating 2.1.1 tft lcd module item symbol min. max. unit note logic supply voltage v dd -0.3 4.0 v 2.1.2 environment absolute rating item symbol min. max. unit note operating temperature t opa 0 50 storage temperature t stg -20 60 item min. typ. max. unit horizontal (h) 234.5 235 235.5 mm vertical (v) 142.5 143 143.5 mm module size depth (d) 4.9 5.2 mm weight 175 185 g www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 6/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 3.0 optical characteristics 3.1 optical specification item symbol condition min. typ. max. unit note contrast cr 400 500 (1)(2)(4) tr 4 8 msec (1)(3) response time tf 12 24 white luminance (5 point) y l 160 200 cd/m 2 (1)(4)(5) (i l =18ma) r x 0.542 0.592 0.642 red r y 0.305 0.355 0.405 g x 0.277 0.327 0.377 green g y 0.505 0.555 0.605 b x 0.104 0.154 0.204 blue b y 0.044 0.094 0.144 w x 0.263 0.313 0.363 color chromaticity (cie1931) white w y =0 normal viewing angle 0.279 0.329 0.379 l 40 45 hor. r 40 45 u 10 15 viewing angle ver. d cr>10 30 35 (1)(4) brightness uniformity b uni =0 (5point) 80 % (5) brightness uniformity b uni =0 (13 points) 70 % (6) 3.2 measuring condition measuring surrounding dark room ambient temperature 252 o c 15min. warm-up time. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 7/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 3.3 measuring equipment fpm520 of westar display technologies, inc., which utilized sr-3 for chromaticity and bm-5a for other optical characteristics. measuring spot size 20 ~ 21 mm note (1) definition of viewing angle: note (2) definition of contrast ratio (cr) : measured at the center point of panel luminance with all pixels white cr = luminance with all pixels black l r u d =0 o =180 o 12 oclock =90 o 6 oclock =270 o www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 8/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. note (3) definition of response time : sum of t r and t f note (4) definition of optical measurement setup time optical response white(tft off) black (tft on) white(tft off) 100% 90% 10% 0% t r t f www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 9/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. note (5) definition of average luminance uniformity of whit e (5 point) average luminance uniformity = note (6) definition of brightness uniformity luminance uniformity(5 points) = 100% luminance uniformity(13points) = 100% (min luminance of 13 points) (max luminance of 13 points) (min luminance of 5 points) (max luminance of 5 points) y 1 +y 2 +y 3 +y 4 +y 5 5 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 10/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 4.0 block diagram 4.1 tft lcd module: 4.2 pixel format 1,1 1,1024 600, 1024 lcd display area 2,1 1,2 1,3 1,4 600 lines 1024 pixel (3072 dots) 600,1 r r r b g 1 pixel dc/dc converter timing controller + lvds receiver connector gray scale manipulation voltage generation circuit liquid crystal panel 1024x600 pixels x-driver ic y-driver ic edid led b/l led driver www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 11/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 4.3 relationship between displayed color and input display msb lsb r 5 r 4 r 3 r 2 r 1 r 0 msb lsb g 5 g 4 g 3 g 2 g 1 g 0 msb lsb b 5 b 4 b 3 b 2 b 1 b 0 gray scale level black l l l l l l l l l l l l l l l l l l - blue l l l l l l l l l l l l h h h h h h - green l l l l l l h h h h h h l l l l l l - light blue l l l l l l h h h h h h h h h h h h - red h h h h h h l l l l l l l l l l l l - purple h h h h h h l l l l l l h h h h h h - yellow h h h h h h h h h h h h l l l l l l - basic color white h h h h h h h h h h h h h h h h h h - black l l l l l l l l l l l l l l l l l l l0 l l l l l h l l l l l l l l l l l l l1 l l l l h l l l l l l l l l l l l l l2 : : : : : : l3l60 h h h h l h l l l l l l l l l l l l l61 dark light h h h h h l l l l l l l l l l l l l l62 gray scale of red red h h h h h h l l l l l l l l l l l l red l63 black l l l l l l l l l l l l l l l l l l l0 l l l l l l l l l l l h l l l l l l l1 l l l l l l l l l l h l l l l l l l l2 : : : : : : l3l60 l l l l l l h h h h l h l l l l l l l61 dark light l l l l l l h h h h h l l l l l l l l62 gray scale of green green l l l l l l h h h h h h l l l l l l green l63 black l l l l l l l l l l l l l l l l l l l0 l l l l l l l l l l l l l l l l l h l1 l l l l l l l l l l l l l l l l h l l2 : : : : : : l3l60 l l l l l l l l l l l l h h h h l h l61 dark light l l l l l l l l l l l l h h h h h l l62 gray scale of blue blue l l l l l l l l l l l l h h h h h h blue l63 black l l l l l l l l l l l l l l l l l l l0 l l l l l h l l l l l h l l l l l h l1 l l l l h l l l l l h l l l l l h l l2 : : : : : : l3l60 h h h h l h h h h h l h h h h h l h l61 dark light h h h h h l h h h h h l h h h h h l l62 gray scale of white & black white h h h h h h h h h h h h h h h h h h white l63 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 12/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 5.0 interface pin connection 5.1 tft lcd module cn1 (input signal): ipex 20455-040e-12 (ipex or equiva lent) pin no. signal description 1 nc no connection 2 vcc 3.3v power supply 3 vcc 3.3v power supply 4 v_edid edid 3.3v power supply 5 nc no connection 6 clk_edid edid clock 7 data_edid edid data 8 rxin0- lvds signal - channel0- 9 rxin0+ lvds signal+ channel0+ 10 gnd ground 11 rxin1- data input channel1- 12 rxin1+ data input channel1+ 13 gnd ground 14 rxin2- data input channel2- 15 rxin2+ data input channel2+ 16 gnd ground 17 rxclkin- data input clk- 18 rxclkin+ data input clk+ 19 gnd ground 20 nc no connection 21 nc no connection 22 gnd ground 23 nc no connection 24 nc no connection 25 gnd ground 26 nc no connection 27 nc no connection 28 gnd ground 29 nc no connection 30 nc no connection 31 vled_gnd led ground 32 vled_gnd led ground 33 vled_gnd led ground 34 nc no connection 35 pwm pwm signal for led dimming control 36 led_en led enable pin (+3v input) 37 nc no connection 38 vled led power supply 5-21v 39 vled led power supply 5-21v 40 vled led power supply 5-21v note the brightness of lcd panel could be changed by adj usting pwm www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 13/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 6.0 electrical characteristics 6.1 tft lcd module item symbol min. typ. max. unit note supply voltage v dd 3.0 3.3 3.6 v note (1) current of power supply idd - 0.192 - a v dd =3.3v l0 pattern ta=25 fv=60hz inrush current i rush - - 1.50 a note (2) note (1) : v dd- dip condition: when vdd operating within 2.7v Q vdd<3.0v td Q 10ms , the display may momentarily become abnormal. vdd<2.7v , vdd dip condition sh ould also follow the power on/off conditions for supply voltage. gnd 3.0 v 2.7v td vdd www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 14/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. note (2) power on inrush current test circuit v dd 0.5 ms 0v 0.9v dd 0.1v dd v in rising time www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 15/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 6.2 switching characteristics for lvds receiver item symbol min. typ. max. unit conditions differential input high threshold vth 100 mv differential input low threshold vtl -100 mv v cm =1.2v -10 +10 ua input current differential input voltage i in |v id | 0.1 0.6 v common mode voltage offset v cm (|v id |/2) 1.25 2.4-(|v id |/2) v 6.3 bit mapping & interface definition for 6bits lvds input rclk rin0 rin1 rin2 lvds receiver input timing definition pervious cycle current cycle next cycle r[2] r[1] r[0] g[0] r[5] r[4] r[3] r[2] r[1] r[0] g[0] b[4] b[3] b[2] de (vs) (hs) b[5] b[4] b[3] b[2] de g[2] g[1] b[1] b[0] g[5] g[4] g[3] g[2] g[1] b[1] g[3] 0.5/7t 1.5/7t 2.5/7t 3.5/7t 4.5/7t 5.5/7t 6.5/7t 7t www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 16/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 6.4 interface timing (de mode) item symbol min. typ. max. unit frame rate -- 55 60 65 hz frame period t1 612 625 638 line vertical display time t2 600 600 600 line vertical blanking time t3 12 25 38 line 1 line scanning time t4 1160 1200 1240 clock horizontal display time t5 1024 1024 1024 clock horizontal blanking time t6 136 176 216 clock clock rate t7 39 45 51.42 mhz timing diagram of interface signal (de mode) www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 17/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 6.5 power on / off sequence note (1) the supply voltage of the external system for the module input should be the same as the definition of v dd . (2) apply the lamp volatge within the lcd operation ran ge. when the back-light turns on before the lcd operation or the lcd truns off be fore the back-light turns off, the display may momentarily become white. (3) in case of vdd = off level, please keep the level o f input signal on the low or keep a high impedance. (4) tp4 should be measured after the module has been fu lly discharged between power off and on period. (5) interface signal shall not be kept at high impedanc e when the power is on. item min. typ. max. unit remark tp1 0.5 -- 10 msec tp2 0 -- 50 msec tp3 0 -- 50 msec tp4 500 -- -- msec tp5 200 -- -- msec tp6 200 -- -- msec power supply signal backlight (recommended ) 0v 0v power on power off 0.9v d d 0.1v dd 0.9v d d 0.1v dd 0.1v dd 0.6 v 0.6 v 50% 50 % tp1 tp2 tp3 tp 4 tp5 tp6 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 18/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 6.6 backlight unit parameter symbol min typ max units condition led current i f -- 18.0 18.75 ma ta=25 led voltage v f 3.0 3.2 3.4 volt ta=25 led power consumption p led -- 1.38 1.53 watt ta=25 note (1) led life-time n/a 10,000 -- -- hour ta=25 i f= 18ma note (2) note (1): calculator value for reference p=i f x v f x n (led qty) note (2): the led lifetime defines as the estimated time to 5 0% degradation of final luminous. 6.7 led driver 6.7.1 absolute maximum ratings item symbol min. max. unit note led power supply voltage v led -0.3 24 volt led_en, pwm pin voltage v en , v pwm -- 5.5 volt 6.7.2 dc electrical characteristics parameter symbol min typ max units remark led power supply voltage v led 5.0 -- 21.0 volt led_en high threshold v enh 2.0 -- -- volt led_en low threshold v enl -- -- 0.3 volt pwm high threshold v pwmh 3.0 -- -- volt pwm low threshold v pwml -- -- 0.2 volt pwm frequency f pwm 200 -- 300 hz pwm duty cycle t d 10 -- -- % note(1) www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 19/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. note(1): pwm duty cycle. pulse duty the bigger the brighter. duty cycl e t d = (t / t) x 100% 6.7.3 led power on/off sequence value symbol min typ max unit t1 10 -- -- t2 10 -- -- t3 50 -- -- t4 0 -- -- t5 10 -- -- ms note: the duty of led dimming signal should be more than 20% in t2 and t3 led power supply, v led dimming signal , pwm led enable , led_en 0v 0v 0.9v led 0.1v led 0.9v led 0.1v led t1 t2 t4 t5 t3 0v t t www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 20/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 7.0 reliability test items no. item conditions remark 1 high temperature storage ta=+60 o c, 240hrs 2 low temperature storage ta=-20 o c, 240hrs 3 high temperature operation ta=+50 o c, 500hrs 4 low temperature operation ta=0 o c, 500hrs 5 thermal cycling test (non operation) -20 o c(30min) +60 o c(30min),100 cycles 6 vibration sine wave 1.5g, 5~500hz, xyz 30min/each direction 7 shock half-sine, 200g, 2ms, xyz, 1time storage / operating temperature note . max wet bulb temp.=39 o c 20 0 100 80 60 40 0 20 40 -20 -40 10 50 temperature ( o c) operating range storage range 60 humidity (%) 90 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 21/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 8.0 outline dimension 8.1 front view outline dimension (2009/7/10 update) bm assembly tolerance | a-a | 1 (mm) | b-b | 1 (mm) suggestion screw spec.-- 2* www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 22/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 8.2 back view outline dimension (2009/3/18 update) hs d b a r c o d e www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 23/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 9.0 lot mark 9.1 lot mark 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 code 1,2,3,4,5,6: hannstar internal flow control co de. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number. note (1) production year year 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 mark 1 2 3 4 5 6 7 8 9 0 note (2) production month month jan. feb. mar. apr. may. jun. jul. aug. sep. oct nov. dec. mark 1 2 3 4 5 6 7 8 9 a b c 9.2 location of lot mark (1) location : the label is attached to the backsid e of the lcd module. see product back view. ( section 8.0 : outline dimension ) (2) detail of the mark : as attached below (3) this is subject to change without prior notice. hsd101pfw2 rev : * - b edx.x 6 a0 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 24/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 10.0 package specification 10.1 packing form lcm model lcm qty. in the box inner box size (mm) notice hsd101pfw2-b 50 pcs/box 460 x 316 x 321 h 10.2 packing assembly drawings hsd101pfw2-b material notice box corrugated paper board (ab flute) partition/pad corrugated paper board (b flute) corner pad corrugated paper board (ab flute) esd bag pe -- www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 25/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 11.0 general precaution 11.1 use restriction this product is not authorized for use in life supp orting systems, aircraft navigation control systems, military systems and any other applicatio n where performance failure could be life-threatening or otherwise catastrophic. 11.2 disassembling or modification do not disassemble or modify the module. it may da mage sensitive parts inside lcd module, and may cause scratches or dust on the dis play. hannstar does not warrant the module, if customers disassemble or modify the mod ule. 11.3 breakage of lcd panel 11.3.1.if lcd panel is broken and liquid crystal sp ills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with ski n. 11.3.2. if liquid crystal contacts mouth or eyes, r inse out with water immediately. 11.3.3. if liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 11.3.4. handle carefully with chips of glass that m ay cause injury, when the glass is broken. 11.4 electric shock 11.4.1. disconnect power supply before handling lcd module. 11.4.2. do not pull or fold the led cable. 11.4.3. do not touch the parts inside lcd modules a nd the fluorescent leds connector or cables in order to prevent electric shock. 11.5 absolute maximum ratings and power protection circuit 11.5.1. do not exceed the absolute maximum rating v alues, such as the supply voltage variation, input voltage variation, variation in pa rts parameters, environmental temperature, etc., otherwise lcd module may be dama ged. 11.5.2. please do not leave lcd module in the envir onment of high humidity and high temperature for a long time. 11.5.3. its recommended to employ protection circu it for power supply. 11.6 operation 11.6.1 do not touch, push or rub the polarizer with anything harder than hb pencil lead. 11.6.2 use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the lcd module for incoming inspection or as sembly. 11.6.3 when the surface is dusty, please wipe gentl y with absorbent cotton or other soft material. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd101pfw2-b formal specification pa ge no. 26/26 document no. revision 1.0 the inf ormation contained in this document is the exclusiv e property of hannstar display corporation. it shal l not be disclosed, distributed or reproduced in whole or in part witho ut written permission of hannstar display corporati on. 11.6.4 wipe off saliva or water drops as soon as po ssible. if saliva or water drops contact with polarizer for a long time, they may ca uses deformation or color fading. 11.6.5 when cleaning the adhesives, please use abso rbent cotton wetted with a little petroleum benzine or other adequate solvent. 11.7 mechanism please mount lcd module by using mounting holes arr anged in four corners tightly. 11.8 static electricity 11.8.1 protection film must remove very slowly from the surface of lcd module to prevent from electrostatic occurrence. 11.8.2 because lcd module use cmos-ic on circuit bo ard and tft-lcd panel, it is very weak to electrostatic discharge. please be car eful with electrostatic discharge. persons who handle the module should be grounded through adequate methods. 11.9 strong light exposure the module shall not be exposed under strong light such as direct sunlight. otherwise, display characteristics may be changed. 11.10 disposal when disposing lcd module, obey the local environm ental regulations. www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of HSD101PFW2-B00

	To Download HSD101PFW2-B00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .